CREDIT INFORMATION

Due to recent "Cyber Theft" and "Fraudulent Copyright Violations" please contact main office 936-756-0442

EMPLOYEE LIST

For employee information please contact main office 936-756-0442

David Heintz
President
A & H Electric Co.
3505 N. Loop 336 West
Conroe, Texas 77304
Office: (936) 756-0442

How to Eliminate Drafts Around Electrical Outlets

eliminating drafts

Drafts in a home can be more than just unpleasant. They may be an indication of air leaks, which can lead to decreased energy-efficiency, and increased monthly expenditures.

If you are feeling the chill or are simply tired of receiving high electricity bills, and you have already sealed around your doors and windows, checking your electrical outlets and light switches for leaks should be next on your to-do list.

Stopping drafts in their tracks, using the method outlined below, is one of the most cost-effective ways for making your home more energy-efficient – not to mention, more comfortable – thus reducing your monthly electricity bills.

Holes Everywhere

Although, electrical outlet and light switch covers may look innocent enough, they are notorious for harboring drafty boxes – especially in older homes and/or on exterior walls, according to the Department of Energy. How much air escapes through these boxes depends on just how airtight the exterior of your home is: if no air is getting into your wall cavities the problem may be minimal.

Materials Required

To seal up your home, thus increasing your energy-efficiency, purchase inexpensive foam outlet and switch cover seals at your local home improvement or hardware store. Make sure to purchase enough for every outlet and light switch cover in your home along with a couple tubes of high-quality caulk. You can further seal the leaks by buying tamper-resistant receptacles.

Steps for Eliminating Drafts

#1. Remove the outlet and light switch covers.

#2. Run a thin bead of caulk where the box meets the drywall.

#3. While the caulk is still wet, apply the foam seal on top, pressing firmly so that it connects with the caulk. This makes for an airtight seal.

#4. Install tamper-resistant receptacles or spring-loaded outlet covers. These are marketed for both energy-efficiency and child proofing. They’re a win, win!

#5. Don’t want to DIY? Contact a local, licensed, residential electrician.

Childproofing with Tamper Resistant Receptacles

Tamper-resistant receptacles
Image Courtesy of Pixabay

Electrical outlets form a major part of our everyday lives. You can find them in every room of your home. Lamps, phone charges, laptop cables, and power outlets all need to plugged into these outlets. Unfortunately, standard electrical outlets were not designed with children’s safety in mind, thus necessitating the need for childproofing – until now. Tamper-resistant receptacles are designed with your children’s safety in mind. Continue reading to learn more about these receptacles.

What are Tamper-Resistant Receptacles?

Tamper-resistant receptacles have spring-loaded shutters that block access to the contacts unless a 2 prong plug is inserted, helping ensure your child cannot insert an object, such as a hairpin, key, etc. The national electric code now mandates the use of tamper-resistant receptacles, so if your home was built in or after 2014, you may be in luck. There is no guarantee, however, that these were installed so it’s always best to make sure that all outlets are tamper proof.

Why Require Tamper-Resistant Receptacles?

The dangers of objects being inserted into electric outlets is very real. In fact, the National Fire Protection Association reports that each year, approximately 2,400 children are injured when they stick items into the slots of standard outlets (those that are not tamper-resistant). If your outlets are not tamper-proof, you have several options, including electrical outlet caps and sliding plate covers. If you’re open to making some modifications, consider replacing the outlets entirely.

Childproofing Occupied Outlets

Tamper-resistant receptacles, outlet covers and sliding plate covers can keep children safe when nothing is plugged in, but what about when you’re using the outlet? Tugging on a cord presents its own share of problems! Some outlet covers are designed to stop little fingers from tugging on cords. These covers feature a box that encloses the entire outlet plate while allowing room for a plug. Cords feed through holes in one side, letting you keep electronics plugged in without making the outlet vulnerable. Similar covers exist for power strips.

Contact a Local, Licensed Electrician

To make sure all your bases are covered, consider contacting a local, licensed electrician to conduct a full safety electrical inspection of your home. If you have a new home, they can inform you as to whether or not your outlets are tamper-resistant.