CREDIT INFORMATION

Due to recent "Cyber Theft" and "Fraudulent Copyright Violations" please contact main office 936-756-0442

EMPLOYEE LIST

For employee information please contact main office 936-756-0442

David Heintz
President
A & H Electric Co.
3505 N. Loop 336 West
Conroe, Texas 77304
Office: (936) 756-0442

Home Electrical Equipment Maintenance Tips

Home Electrical Equipment

A homeowner’s to-do list can often seem endless. Clean the gutters. Mow the lawn. Declutter the garage. Deep clean the kitchen and bathrooms. Repair a leaky faucet. Change the HVAC filters. Then, there’s the big one: Maintain the home electrical equipment. Ensuring your home electrical equipment is in good shape can prevent damage, injuries, and high repair costs.

Here are some home electrical equipment maintenance tips.

Install Tamper-Resistant Receptacles

According to the 2008 National Electrical Code® (NEC), power outlets in homes with children are required to have tamper-resistant receptacles (TRRs), which are designed to protect them from accidental shock resulting from the insertion of foreign objects. TRRs are UL-listed for safety and reliability. If you don’t already have them, contact a licensed electrician to install tamper-resistant receptacles throughout your home.

Test GFCI Outlets

Short for ground-fault circuit interrupters, GFCI outlets are designed to constantly monitor electricity flow, and instantly “trip” anytime an imbalance is detected. Building codes require GFCI installation in rooms where there is water such as a kitchen, bathroom, laundry room, and garage.

You will notice two buttons on a GFCI: A red one, which activates the outlet after the built-in breaker is tripped, and a black one that tests it to ensure proper functioning. The U.S. Consumer Product Safety Commission (CPSC) recommends testing these outlets once a month as well as after installation or an electrical power outage.

To test your ground-fault circuit interrupters, plug a lamp into the outlet. Turn the lamp on and press the GFCI’s test button. Did the light go out? If not, the outlet is not working properly, and you should contact a licensed electrician to correct the problem and/or replace the outlet.

Check Weatherstripping

If the weatherstripping around your home’s windows and doors is brittle or cracked, replace it. Weatherstripping helps to reduce drafts as well as block energy loss. You can find several different materials available at most any local hardware or home improvement store. The right one to choose will depend on the style of the window or door. Just cut to size and install according to manufacturer instructions.

Change Your HVAC Filters

Your heating, ventilation, and air conditioning (HVAC) system circulates air throughout your home. Its goal is to ensure the occupant’s thermal comfort and acceptable indoor air quality. HVAC filters are just one of the many components that work in unison with the system. These filters should be changed every 30 to 90 days, depending on your system, and whether you have pets or household members with allergies.

Change Batteries in Detectors

Smoke and carbon monoxide detectors are installed for your safety. Ensure they work properly by testing them every month. Change their 9V batteries every six months, or earlier if the alarm chirps, warning that the battery is low. Alarms with non-replaceable batteries are designed to remain effective for 10 years. Follow the National Fire Protection Association (NFPA) guidelines for installation.

Label Your Breaker Box

Labeling the breakers in your breaker box, properly known as the main service panel, will save time for both your and an electrician. You can make nice, neat, black-and-white labels for each breaker with a label maker. Create labels that are easy to read and won’t cause confusion such as “Master Bed.,” “Hall Bath,” and “Laundry Room.” Label breakers that are not connected to anything as “Spare.”

Only You Can Prevent Electrical Fires

electrical fires
Image Courtesy of the NFPA

Electrical failure or malfunctions account for more than 45,000 home fires per year and result in 420 deaths, 1,370 injuries, and $1.4 billion in direct property damage per year according to the National Fire Protection Agency (NFPA). To help reduce your risk of electrical fires, keeping you and your family safe, follow these simple safety tips.

Start with an inspection

The electrical system in your home may need to be rewired if your home is more than 40 years old, you’ve made major home improvements or added major new appliances, if your home has two-prong outlets, you frequently trip breakers or blow fuses, or if your home has aluminum instead of copper wiring. Even if none of these situations apply to you, you can’t go wrong with an expert electrical inspection.

Don’t overload your outlets

Overloading is a common cause of electrical fires. This happens when you plug too many appliances into the same outlet using an extension cord or power splitter. The U.S. Fire Administration recommends buying power strips equipped with internal surge protection. This ensures that a strip shuts off as soon as it becomes overloaded. Keep in mind that strips and extension cords are a temporary solution, not a permanent one.

Don’t DIY It

If you want turn off the electricity to your home, and install dimmer switches or replace an old ceiling fan, go right ahead. However, when it comes to installing additional outlets or rewiring your home, always contact a qualified electrician. DIY electrical work is not advisable because of the potential for danger: electrical shock or fire. All aspects of electrical work are governed by very strict codes.

Additional Safety Tips

  • Install smoke detectors on each level of the home, and inside each bedroom
  • Test smoke detectors monthly to ensure that they are working properly
  • Establish an emergency evacuation plan, and practice with your family
  • In homes with small children, install tamper resistant receptacles
  • Use light bulbs that match the recommended wattage on the fixture
  • Ask a qualified electrician if your home would benefit from Arc-Fault protection
  • Never use extension cords to power major appliances, always plug into an outlet
  • Have a qualified electrician add outlets to reduce your use of extension cords

How to Eliminate Drafts Around Electrical Outlets

eliminating drafts

Drafts in a home can be more than just unpleasant. They may be an indication of air leaks, which can lead to decreased energy-efficiency, and increased monthly expenditures.

If you are feeling the chill or are simply tired of receiving high electricity bills, and you have already sealed around your doors and windows, checking your electrical outlets and light switches for leaks should be next on your to-do list.

Stopping drafts in their tracks, using the method outlined below, is one of the most cost-effective ways for making your home more energy-efficient – not to mention, more comfortable – thus reducing your monthly electricity bills.

Holes Everywhere

Although, electrical outlet and light switch covers may look innocent enough, they are notorious for harboring drafty boxes – especially in older homes and/or on exterior walls, according to the Department of Energy. How much air escapes through these boxes depends on just how airtight the exterior of your home is: if no air is getting into your wall cavities the problem may be minimal.

Materials Required

To seal up your home, thus increasing your energy-efficiency, purchase inexpensive foam outlet and switch cover seals at your local home improvement or hardware store. Make sure to purchase enough for every outlet and light switch cover in your home along with a couple tubes of high-quality caulk. You can further seal the leaks by buying tamper-resistant receptacles.

Steps for Eliminating Drafts

#1. Remove the outlet and light switch covers.

#2. Run a thin bead of caulk where the box meets the drywall.

#3. While the caulk is still wet, apply the foam seal on top, pressing firmly so that it connects with the caulk. This makes for an airtight seal.

#4. Install tamper-resistant receptacles or spring-loaded outlet covers. These are marketed for both energy-efficiency and child proofing. They’re a win, win!

#5. Don’t want to DIY? Contact a local, licensed, residential electrician.

Childproofing with Tamper Resistant Receptacles

Tamper-resistant receptacles
Image Courtesy of Pixabay

Electrical outlets form a major part of our everyday lives. You can find them in every room of your home. Lamps, phone charges, laptop cables, and power outlets all need to plugged into these outlets. Unfortunately, standard electrical outlets were not designed with children’s safety in mind, thus necessitating the need for childproofing – until now. Tamper-resistant receptacles are designed with your children’s safety in mind. Continue reading to learn more about these receptacles.

What are Tamper-Resistant Receptacles?

Tamper-resistant receptacles have spring-loaded shutters that block access to the contacts unless a 2 prong plug is inserted, helping ensure your child cannot insert an object, such as a hairpin, key, etc. The national electric code now mandates the use of tamper-resistant receptacles, so if your home was built in or after 2014, you may be in luck. There is no guarantee, however, that these were installed so it’s always best to make sure that all outlets are tamper proof.

Why Require Tamper-Resistant Receptacles?

The dangers of objects being inserted into electric outlets is very real. In fact, the National Fire Protection Association reports that each year, approximately 2,400 children are injured when they stick items into the slots of standard outlets (those that are not tamper-resistant). If your outlets are not tamper-proof, you have several options, including electrical outlet caps and sliding plate covers. If you’re open to making some modifications, consider replacing the outlets entirely.

Childproofing Occupied Outlets

Tamper-resistant receptacles, outlet covers and sliding plate covers can keep children safe when nothing is plugged in, but what about when you’re using the outlet? Tugging on a cord presents its own share of problems! Some outlet covers are designed to stop little fingers from tugging on cords. These covers feature a box that encloses the entire outlet plate while allowing room for a plug. Cords feed through holes in one side, letting you keep electronics plugged in without making the outlet vulnerable. Similar covers exist for power strips.

Contact a Local, Licensed Electrician

To make sure all your bases are covered, consider contacting a local, licensed electrician to conduct a full safety electrical inspection of your home. If you have a new home, they can inform you as to whether or not your outlets are tamper-resistant.