CREDIT INFORMATION

Due to recent "Cyber Theft" and "Fraudulent Copyright Violations" please contact main office 936-756-0442

EMPLOYEE LIST

For employee information please contact main office 936-756-0442

David Heintz
President
A & H Electric Co.
3505 N. Loop 336 West
Conroe, Texas 77304
Office: (936) 756-0442

Tag: electricians

Gain Confidence And Learn How To Replace Your Own Outlets

A&H Electric, Electrical, Electricity 101, Home, outlets

Are you interested in upgrading one or more outlets in your home but have no idea how to? Do you need to replace a damaged outlet? If yes, to either of these questions, then this is the blog post for you!

The idea of changing an outlet usually gets mixed feeling from many people. Some people will either know how to do it with no problems and others may have a fear of getting electrocuted which can prevent them from ever learning how. Whatever the reason, many people fail to learn how to replace an outlet, which is a very simple and basic home repair.

So, whether you are updating an old outlet or replacing a damaged outlet, these step-by-step instructions will help you ensure a smooth replacement while giving you confidence in your actions.

What You Need:

  • Outlet
  • Outlet Cover
  • Flathead and Philip Screwdrivers
  • Wire Stripper

When changing outlets, it is important to remember to shut the power off in the area where the outlet is located.

You can do this by turning off the switch in the fuse box to the specified location. Once the power has been shut off, the next thing to do is test the outlet. Plug a small appliance in the outlet to test if the outlet has no power. If the appliance is off, you have turned off the right circuit switch, if not, go back to the fuse box and locate the correct switch.

Once the power is off, grab your tools and begin replacing the outlet:

  1. Remove the outlet cover with a flathead screwdriver and place aside.
  2. Unscrew the two outlet screws and pull “old” outlet from wall, carefully.
  3. Unscrew one wire from the old outlet and then use the wire stripper to expose more wire.
  4. Take the exposed wire and using a Philip screwdriver, screw the wire onto the new outlet on the same position as it was on the old outlet.
  5. Repeat steps 3 and 4 until you have unscrewed, stripped, and screwed in all stripped wires to the correct location on the new outlet.
  6. Place new outlet back into wall and screw the outlet cover back in place.
  7. Turn the circuit switch to the outlet back on and test the outlet.
  8. Enjoy you’re new and upgraded outlet!

If you would like any advice from your Electrician Experts, please contact us today for your questions at (936) 756-0442.

This Math Problem Will Change Your Home, Forever; All You Need Is Time, Patience, & a Little Curiosity

A&H Electric, Circuit Breakers, Electrical, Electricity 101, Helpful Tips

It is safe to say that most people own at least one computer. Owning a computer may also mean owning accessories for your personal computer. For example, speakers, an additional monitor, printer, modem, router, keyboard, and mouse. For those who use their computers for picture sharing or school work may also have an external flash drive, which allows extra space for storing files and pictures without slowing down the computer. Now, consider how many power cords will need to be plugged into an outlet in order to power a computer and its accessories. If you try to plug in all of these appliances, you will find that your standard outlet only allows for two appliances at a time. You could plug an extension cord to another outlet to power more devices and appliances, but still, more plugs are needed? This is the point where you are hoping you have a power strip, which allows for housing several different outlets on a single bar.

“This Math Problem Will Change Your Home, Forever; All You Need Is Time, Patience, & a Little Curiosity”Continue reading

4 Electrical Issues That You Can Troubleshoot in Your Home

A&H Electric, Circuit Breakers, Electrical, Electricity 101, Home, Lighting, outlets, sparking

Most electrical problems need to be handled by a licensed electrician, like the ones at  A&H Electric.  If you are not a qualified professional, a mistake could be made that could cause an electrical fire and the results could be disastrous!  Every year many house fires are caused by improper electrical wiring, so if you aren’t sure, don’t try to fix it yourself.  There are, however, a few problems that can be safely solved with a little bit of troubleshooting.

“4 Electrical Issues That You Can Troubleshoot in Your Home”Continue reading

Vampire Energy

A&H Electric, Electrical, Energy Saving, Helpful Tips, outlets, power surges

Is electricity being used when items in your home are plugged into an outlet but not on?

A&H Electric ElectriciansIn order to answer this question about vampire energy, we must first consider a few factors. First thing first, vampire energy is what many refer to as the electricity that is wasted as a result of plugged in items that are still using electricity when off. Depending on the appliance and/ or device, in most cases you will discover that the devices are never truly off. Usually, the device is in a standby mode, which still requires the use of some electricity. The amount used also depends on the device. For example, a large television, like a plasma television, will use more watts than something like a blender because it is constantly processing information.

“Vampire Energy”Continue reading

Replacing a Light Switch

A&H Electric, Electricity 101, Lighting, outlets

When the word, Electrical, is heard, many people are scared off by the job. This we can understand, because electricity can be very dangerous and life threatening, if handled with incorrectly. For this reason, there are not many things we can recommend to do without a professional electrician.

Nonetheless, there are a few simple task that can be done around the house involving electricity. Have you ever replaced a light switch panel? This needs to be replaced from time to time due to corrosion and/or due to paint. No need to fret, this job can be completed in no time and without injuries, if done properly, of course.

“Replacing a Light Switch”Continue reading

Let The Temperature Rise This Summer, Not Your Electric Bill!

A&H Electric, Energy Saving, Helpful Tips, Home

How To Save Money On Your Electric Bill - Houston, Texas
Every summer, the electric bill begins to rise alongside the rising temperatures outside. One gets hotter while the other burns holes in your pockets, but is there anything you can do about this? Of course, it begins with being aware!

By becoming more aware of yourself and your surroundings, you can begin to see the big picture. How much are you actually spending on fast food or do you remember turning off the lights once you leave a room? Becoming observant can help you save money, and even better, save money on your electric bill.

“Let The Temperature Rise This Summer, Not Your Electric Bill!”Continue reading

How It Works: The Light Bulb

A&H Electric, Electrical, Electrical Insulators, Electricity 101, Light Bulbs, Lighting

In 1878 and 1879, both Englishman Sir Joseph Swan and American Thomas Edison were able to create lighting device, called a light bulb. Both light bulbs of the mid 1800s were effective enough then that the structure of the light bulb has not changed much.

A glass light bulb will contain several parts in order to create energy. When the light bulb has a power supply, such as being screwed into a lamb, an electric current will flow within the circuit, and then light is emitted. In this picture from HowStuffWorks, you can see that there is a (n):

“How It Works: The Light Bulb”Continue reading

A&H Electric’s Vision

A&H Electric, Electrical, Why Choose A&H Electric

A&H Electric Company was founded in September of 1977 by Ray Audas and David Heintz with the vision of creating an electrical contracting business dedicated to customer service and reliability. These basic business principals and our 34 years of experience in the electrical trade will allow us to offer the finest electrical contracting services well into the future.

Call us today at (936) 756-0442.