CREDIT INFORMATION

Due to recent "Cyber Theft" and "Fraudulent Copyright Violations" please contact main office 936-756-0442

EMPLOYEE LIST

For employee information please contact main office 936-756-0442

David Heintz
President
A & H Electric Co.
3505 N. Loop 336 West
Conroe, Texas 77304
Office: (936) 756-0442

Category: A&H Electric

Only You Can Prevent Electrical Fires

A&H Electric, Electrical, Electrical Safety, Tamper-Resistant Receptacles
electrical fires
Image Courtesy of the NFPA

Electrical failure or malfunctions account for more than 45,000 home fires per year and result in 420 deaths, 1,370 injuries, and $1.4 billion in direct property damage per year according to the National Fire Protection Agency (NFPA). To help reduce your risk of electrical fires, keeping you and your family safe, follow these simple safety tips.

Start with an inspection

The electrical system in your home may need to be rewired if your home is more than 40 years old, you’ve made major home improvements or added major new appliances, if your home has two-prong outlets, you frequently trip breakers or blow fuses, or if your home has aluminum instead of copper wiring. Even if none of these situations apply to you, you can’t go wrong with an expert electrical inspection.

Don’t overload your outlets

Overloading is a common cause of electrical fires. This happens when you plug too many appliances into the same outlet using an extension cord or power splitter. The U.S. Fire Administration recommends buying power strips equipped with internal surge protection. This ensures that a strip shuts off as soon as it becomes overloaded. Keep in mind that strips and extension cords are a temporary solution, not a permanent one.

Don’t DIY It

If you want turn off the electricity to your home, and install dimmer switches or replace an old ceiling fan, go right ahead. However, when it comes to installing additional outlets or rewiring your home, always contact a qualified electrician. DIY electrical work is not advisable because of the potential for danger: electrical shock or fire. All aspects of electrical work are governed by very strict codes.

Additional Safety Tips

  • Install smoke detectors on each level of the home, and inside each bedroom
  • Test smoke detectors monthly to ensure that they are working properly
  • Establish an emergency evacuation plan, and practice with your family
  • In homes with small children, install tamper resistant receptacles
  • Use light bulbs that match the recommended wattage on the fixture
  • Ask a qualified electrician if your home would benefit from Arc-Fault protection
  • Never use extension cords to power major appliances, always plug into an outlet
  • Have a qualified electrician add outlets to reduce your use of extension cords

How to Properly Clean Your Electronic Devices

A&H Electric, Electrical, Helpful Tips, Home Appliances

Do you spray Windex on everything and rub it down with a paper towel? While this may be okay for countertops, mirrors and if you’ve seen My Big Fat Greek Wedding, cuts and abrasions, it can cause all sorts of damage to your electronic devices.

I know what you’re probably thinking, and the answer is no, you won’t have to spend more time or money cleaning them. In fact, they are remarkably easy to clean if you do it right, and with the right cleaning solution.

Here’s how to properly clean your electronic devices.

Dusting

One of the biggest enemies to your electronic devices is dust. Dust settles, thickens and eventually blocks the airflow of fans, vents and other critical components. Overheating can occur without airflow. Attract dust particles using a microfiber cloth.

Screens

More than most electronics, flat screen TVs, touch screens and computer monitors are vulnerable to damage from harsh or abrasive cleaning products. The ideal cleaning solution for these screens is two parts water to two parts white vinegar. Apply this solution to a microfiber cloth – never to the screen – to gently buff out spots. Be careful not to apply too much pressure.

Disc Players

The disc readers inside DVD players, Blu-Ray players, and video game consoles are extremely delicate and may start generating errors if dust thickens on or in them. Look for disc cleaner kits that can clean both your devices and discs. Make sure it’s compatible with your device. Gently dust the device’s exterior using a microfiber cloth.

Keyboards

Keyboards get a ton of use, so they get dirty, fast. Before cleaning, be sure to unplug or otherwise disable them. Start by using a can of compressed air (found at your local office supply store) to blow out any debris. Then remove any buildup using cotton swabs dipped in rubbing alcohol.

Remote Controls

Remote controls are a magnet for germs and dirt, conveniently delivered by your, your family’s or your guest’s fingers. Spray compressed air between the buttons to loosen any embedded dirt and debris. Disinfect by wiping with an antibacterial wipe. Hit your video game controllers the same way.

Make cleaning your electronic devices part of your weekly cleaning routine to ensure dust, dirt and debris don’t wear them down, causing them to fail prematurely. If you need help powering your electronic devices, however, contact A&H Electric at (936) 756-0442.

Protect Your Home with a Whole-House Surge Protector

A&H Electric, Electrical Safety, Home Appliances, Power Outages, power surges

Each electronic device in your home, from your HVAC unit to your large screen television, and high-tech audio equipment has a microprocessor. Without adequate protection, power surges can destroy these microprocessors, rendering your home electronics and/or appliances completely useless. The cost to replace each damaged device is much more expensive than installing a whole-house surge protector.

Where do surges come from?

Power surges can originate from external and internal sources. External sources include lightning striking nearby circuits and the electric utility company switching power grids. These surges can enter the house through several pathways. Internally, power surges result when large appliances like air conditioners and refrigerators turn on and off their motors, decreasing the flow of power. Static electricity can also cause power surges.

Whole-House Surge Protectors

Type 1

A Type 1 Surge Protection Device (SPD), also known as a secondary surge arrestor, protects against external power surges, such as those caused by lightning striking utility equipment, tree limbs touching a power line or your power company switching power grids. They are typically installed on the line side of the main service entrance. They are your first line of defense against potentially damaging power surges.

Type 2

A Type 2 SPD, also known as panel protector, is installed at your branch panel (more commonly referred to as your breaker panel). Wired directly to a dual-pole breaker in your panel, type 2 surge protectors protect all the circuits in that panel, as well as any subpanels that might be connected downstream. They generally provide protection against surges originating from inside your home.

Type 3

This category is one you are probably already familiar with. Devices, such as power strips and battery backups with built-in surge protection, suppress the lower level voltage spikes that can be especially damaging to high-tech electronics (e.g, computers, audio components, Smart TVs, and other household electronics). Power strips should specify that they have surge protection capabilities to be considered an SPD.

A full-featured whole-house surge protector diverts power surges away from your home and into the ground. Look for an SPD with a minimum rating of 50kA (1kA equals 1,000-amps). You will also want to make sure the device you choose complies with the most recent UL rating. Contact a licensed electrician in your area for professional whole-house surge protection device installation.

How to Recycle Your Electronics

A&H Electric, Conservation Policies, Energy Saving, Home Appliances

Recycle Your Electronics

Leaving dated, damaged or non-working electronics on the curb, or tossing them in the trash can for the garbage man to pick up might sound like a good idea, but it’s not the most environmentally friendly nor is it safest option.

Old electronics, such as, televisions, DVD players, VCRs, cell phones, alarm clocks, video games, cameras, and laptops contain heavy metals such as cadmium, mercury and lead which can leach into the ground. This is damaging to the environment.

A Growing Problem

The typical American family own 24 electronic devices [Source: Consumer Technology Association]. At any given time, however, this number may grow or decline. As these products break, they are often replaced with newer models, although it’s not uncommon for people to upgrade some devices annually when the newest flagship hits the market.

2.4 million tons of electronic waste (e-waste) can be found in our landfills. Because landfills are not designed to receive e-waste, the chance of hazardous wastes being released into the environment is higher, and the opportunity to recover precious metals (e.g., aluminum, copper, gold, and silver) in these devices lower.

A Better Choice

A better alternative is to donate it for reuse or drop it off at a recycling center. The U.S. Environmental Protection Agency (EPA) offers many reference tools, from directories of local and government supported drop-off centers to manufacturers’ mail-in recycling and trade-in programs; found on their website. Companies like YouRenew.com will even pay you to recycle your old devices.

Before Donating or Recycling, You Should:

  • Determine if the device can be fixed
  • Delete all personal information from your devices
  • Remove any batteries and/or hard drives from your devices
  • Contact your local recycling facilities, ensuring they accept the device you wish to donate or recycle

Recycle Your Electronics Benefits

There are several benefits to recycling your electronics, including:

  • Creates jobs
  • Frees up landfill space
  • Protects the environment
  • Conserves natural resources
  • Helps others (by donating)

For additional ways you can help the environment, while saving energy and money, we encourage you to read our blog monthly or visit us at www.ahelectric.com.

Save on Utilities

A&H Electric, Energy Saving, Light-Emitting Diodes (LEDs), Programmable Thermostats

save on utilities

Oftentimes, many Texas families stare dejectedly at utility bills exceeding $100, $200 and sometimes more per month. According to 2014 data from the U.S. Energy Information Administration (EIA), the average monthly electricity bill in Texas is $137.39; among the highest in the nation. Water bills vary depending on city. This is because part of the state has a deregulated utilities market. Though this may be a hard pill to swallow, there are steps you can take to save on utilities.

Turn it Down

One of the easiest ways to save money on utilities is to turn down the heat in the winter and the air conditioner in the summer. Try setting the thermostat to 79 degrees in the summer. During the winter, set it at 68 degrees during the day, turning it down to 65 degrees at night or when you’re planning to be away from home. For additional savings, as well as convenience, install a programmable thermostat.

Turn it Off

It generally takes less than two minutes to walk through the house – depending on its square footage – ensuring all lights, fans and electronics are fully shut off. You may also want to unplug any electronics as well as appliances when they are not being used as they may still draw energy. These devices are called “vampires.” The best thing you can do is to develop a “turn it off” rule in your house.

Keep it Clean

Be sure to regularly clean your air filters. ENERGY STAR recommends changing them monthly or every three months if you invest in high-quality HEPA filters. Clean air filters are critical to the proper performance of your heating, ventilation, and air conditioning system (HVAC), not to mention to your home’s indoor air quality, as well as lowering your monthly heating and cooling costs.

Add Insulation

Inadequate levels of insulation can result in abnormally high energy bills. If you’re not sure why your bill is so high, you may want to invest in an energy audit or at the very least, have an insulation contractor come out to measure your current insulation levels. It is worth the investment! According to this year’s Cost vs. Value report, adding fiberglass insulation to your attic has an average return on investment of 107.7%.

Switch to LEDs

Choose light bulbs carefully. ENERGY STAR rated light emitting diodes (LEDs) use 90 percent less energy than standard incandescent bulbs and last 25 times longer. When you compare them directly with other energy efficient light bulbs – those currently on the market today – you will find that LED is the smartest solution for illumination. They are environmentally friendly as well. No conversion is required.

Making the Switch to LEDs

A&H Electric, Energy Saving, Light-Emitting Diodes (LEDs), Lighting

LEDs

LEDs are extremely energy efficient, consuming 90% less power than incandescent bulbs, and lasting 50,000 times longer. Although these bulbs may have a higher initial cost than more traditional bulbs, like incandescent, the cost is quickly recouped over time in lower electricity costs. These bulbs are also made from non-toxic materials, generate virtually no heat, and are 100% recyclable. If you have been considering making the switch to LEDs, NOW is definitely the best time to do so.

The History of LEDs

In 1878, Thomas Edison developed and patented the first, practical incandescent light bulb. In 1880, he began marketing these light bulbs to the public, doing business under the name of “Edison Electric Light Company.” Over the next several decades, other inventors also created light bulbs, and in 1962 the first practical light-emitting diode (LED) was created and marketed to the public.

In addition to LEDs, more types of energy efficient light bulbs, including the halogen bulb and the compact fluorescent bulb (CFL) were developed. Of the three, LEDs are available in a wide variety of shapes, wattages and sizes to accommodate most any light fixture. Today, the incandescent light bulb is considered obsolete given its relatively low brightness, and high energy consumption.

Environment Friendly

LEDs require very little electrical power to operate. In addition, their operating life is very competitive when compared directly with other types of light bulbs; approximately 50,000 hours compared to incandescent bulbs’ 2,000. Lastly, LEDs tend to generate less heat than other types of light bulbs, which avoids energy loss thus saving you 50 to 80 percent on your utility bills each month

Making the Switch is as Easy as 1-2-3

  1. Visit your local home improvement, hardware, or big box retailer to purchase replacement LED bulbs in the specific size, shape, and wattage you need.
  2. Remove your fixture’s existing light bulb, properly disposing of them.
  3. Install the bulbs. LED bulbs don’t require any conversion kits. They use the same sockets as your old incandescent or compact fluorescent bulbs.

Holiday Lighting Safety Tips

A&H Electric, Christmas, Electrical Safety, Holiday

The holiday season is upon us and, as a result many of you may be out late into the night hanging light sets and decorations, in an effort to create a little holiday cheer…and perhaps avoid the family much like Clark Griswold of National Lampoon’s Christmas Vacation.

However, before you go all out, there are several things you should NOT do when it comes to holiday decorating. At A&H Electric, we want you to have a happy and safe holiday season, so we’ve put together a list of safety tips for you to improve your holiday lighting experience.

The Do’s of Holiday Lighting

DO invest in LED (light emitting diode) light sets. While you may have to spend a little more, you’ll definitely save money in the long run, as these light sets cost pennies to run and last twelve times as long as traditional bulbs.

DO always make sure you have someone helping you with your display – especially when you’re using a ladder. Even if it looks like an easy job, hanging holiday lighting really takes two-people; one on the ground to hold the ladder steady and one hanging lights.

Do be a good neighbor. When Clark plugged in his lights, he took out most of Chicago, leaving his neighbors in the dark. Freezing out your neighbors on Christmas Eve probably isn’t the best way to spread holiday cheer.

Do inspect holiday lights. Frayed or otherwise damaged electrical cords should be properly discarded as they are the leading cause of structural fire. Lights with broken sockets should also be discarded because they too pose significant safety hazards. Burned-out bulbs? Swap them out. The risk of an empty socket is too great.

Do use the correct outlets. Any outdoor lighting should be plugged into a ground-fault circuit interrupter, which will automatically cut the power in the event of a short, or a spike in power. You should also use UL rated electrical cords.

Do properly store your light lights and outdoor decorations so you don’t end up with a giant ball of tangled holiday lights next year. You can find power cord holders at virtually any home improvement store or create your own using leftover cardboard.

The Don’ts of Holiday Lighting

Don’t use a staple gun to hang lights. Staples and nails can cause serious damage to your siding, bricks/stucco, and rain gutters. Using these can also cause a fire. Instead, consider specially designed light clips, which are safer to use and easier to install.

Don’t use indoor lights on the exterior of your home. Outdoor lights often burn hotter than indoor lights, and are equipped with water-resistant cords, so don’t use them indoors unless they specify they are indoor/outdoor compatible.

Don’t leave your lights on all hours of the night or when everyone is away from home. In the event a problem develops, it is essential that someone be on hand and alert in order to react quickly, thus thwarting any property damage or personal injury.

How to Eliminate Drafts Around Electrical Outlets

A&H Electric, Childproofing, Electrical Safety, Energy Saving, Tamper-Resistant Receptacles

eliminating drafts

Drafts in a home can be more than just unpleasant. They may be an indication of air leaks, which can lead to decreased energy-efficiency, and increased monthly expenditures.

If you are feeling the chill or are simply tired of receiving high electricity bills, and you have already sealed around your doors and windows, checking your electrical outlets and light switches for leaks should be next on your to-do list.

Stopping drafts in their tracks, using the method outlined below, is one of the most cost-effective ways for making your home more energy-efficient – not to mention, more comfortable – thus reducing your monthly electricity bills.

Holes Everywhere

Although, electrical outlet and light switch covers may look innocent enough, they are notorious for harboring drafty boxes – especially in older homes and/or on exterior walls, according to the Department of Energy. How much air escapes through these boxes depends on just how airtight the exterior of your home is: if no air is getting into your wall cavities the problem may be minimal.

Materials Required

To seal up your home, thus increasing your energy-efficiency, purchase inexpensive foam outlet and switch cover seals at your local home improvement or hardware store. Make sure to purchase enough for every outlet and light switch cover in your home along with a couple tubes of high-quality caulk. You can further seal the leaks by buying tamper-resistant receptacles.

Steps for Eliminating Drafts

#1. Remove the outlet and light switch covers.

#2. Run a thin bead of caulk where the box meets the drywall.

#3. While the caulk is still wet, apply the foam seal on top, pressing firmly so that it connects with the caulk. This makes for an airtight seal.

#4. Install tamper-resistant receptacles or spring-loaded outlet covers. These are marketed for both energy-efficiency and child proofing. They’re a win, win!

#5. Don’t want to DIY? Contact a local, licensed, residential electrician.

Childproofing with Tamper Resistant Receptacles

A&H Electric, Childproofing, Electrical Safety, Tamper-Resistant Receptacles
Tamper-resistant receptacles
Image Courtesy of Pixabay

Electrical outlets form a major part of our everyday lives. You can find them in every room of your home. Lamps, phone charges, laptop cables, and power outlets all need to plugged into these outlets. Unfortunately, standard electrical outlets were not designed with children’s safety in mind, thus necessitating the need for childproofing – until now. Tamper-resistant receptacles are designed with your children’s safety in mind. Continue reading to learn more about these receptacles.

What are Tamper-Resistant Receptacles?

Tamper-resistant receptacles have spring-loaded shutters that block access to the contacts unless a 2 prong plug is inserted, helping ensure your child cannot insert an object, such as a hairpin, key, etc. The national electric code now mandates the use of tamper-resistant receptacles, so if your home was built in or after 2014, you may be in luck. There is no guarantee, however, that these were installed so it’s always best to make sure that all outlets are tamper proof.

Why Require Tamper-Resistant Receptacles?

The dangers of objects being inserted into electric outlets is very real. In fact, the National Fire Protection Association reports that each year, approximately 2,400 children are injured when they stick items into the slots of standard outlets (those that are not tamper-resistant). If your outlets are not tamper-proof, you have several options, including electrical outlet caps and sliding plate covers. If you’re open to making some modifications, consider replacing the outlets entirely.

Childproofing Occupied Outlets

Tamper-resistant receptacles, outlet covers and sliding plate covers can keep children safe when nothing is plugged in, but what about when you’re using the outlet? Tugging on a cord presents its own share of problems! Some outlet covers are designed to stop little fingers from tugging on cords. These covers feature a box that encloses the entire outlet plate while allowing room for a plug. Cords feed through holes in one side, letting you keep electronics plugged in without making the outlet vulnerable. Similar covers exist for power strips.

Contact a Local, Licensed Electrician

To make sure all your bases are covered, consider contacting a local, licensed electrician to conduct a full safety electrical inspection of your home. If you have a new home, they can inform you as to whether or not your outlets are tamper-resistant.